How to Cut Marble?

Last Updated on March 24, 2021 by James

Looking for the methods to cut Marble? Well, Marble is a type of natural stone that is used for countertops as well as tiling purpose. Adding a marble to the tiled floor, wall or other decorative accent gives beauty and increases the value of the place.

Now if you are an ordinary homeowner, then cutting marbles seems to be an impossible task for you. However, with the right tools and knowledge, make this task achievable without the help of professionals. Also, it saves your money too. Apart from all these things doing this project on your own can save a lot of money and time.

So, without wasting any further time, let’s get started.

How to Cut Marble?

Here, we have mentioned the complete step by step guide which can help you quickly cut the Marble tiles or slabs. Make sure to follow each step very carefully in order to get a perfect product.

The Tool of the Trade

Initially, you need to secure yourself before cutting the marble. Radically, the home project like cutting of marble requires a wet saw, so you have to be very careful with the tools. The wet saw can’t only cut the marble, but it will grind the latter.

The wet saw blade has diamond crystals, which affixes to the edge of its segment. This diamond crystal is effective against the dense as well as sturdy objects. With the help of friction, the diamond blade efficiently grinds through any surface that touches it.

Make sure you operate the wet saw where there is continuous water source available. The water primarily serves as a cooling agent of the blade. Furthermore, the water also protects the structural integrity of the blade as well as marble itself.

Step 1: Learn How to Use the Saw

Initially, you need to read all the operating instructions accompanying the saw and make sure it works correctly before you proceed further. You must check the water sprayer and make sure that the stream hits the blade when you run the saw.

Step 2: Take Measurements Properly

Make sure you take all the accurate measurements on your marble. You can use the small strips of masking tape as your cut guide.

Step 3: Finally Make the Cut

Once you have done all the marking on your marble tiles, you can now place your marble tile on the wet saw surface and make sure the water sprayer is working. Slowly bring the blade down and cut the tile.

Note: Please ensure that you’ll wear gloves and protective eyewear. Also, keep your fingers away from the spinning, wet saw blade.

Step 4: Snip It

You can see the tiny pieces along with the edges of cut marble tiles. Make sure to remove these sharpened edges with your tile snippers by exerting enough pressure on the snippers to break off all these small pieces from the marble tile.

Be careful, and take your time to remove these pieces properly.

Step 5: Sand Edges

The cut marble tiles will have the rough edges which you need to be smoothed. Start sanding with sandpaper using an up and down method until you achieve a smooth, beveled effect.
Repeat the process until you obtain the smooth edge.

Step 6: Clean the Marble

Once you have done with all the process, make sure dispose of all the unusable tile and tile pieces quickly. The marble tile cut pieces may be extremely sharp presenting a danger while handling or lying around, so be careful.

Note: Make sure to clean up your work area including wiping down the saw.

Conclusion

Learning how to cut marble slabs as well as tiles is not a thing for professionals. Even homeowners and weekend warriors can do this task easily. All you need to do is acquire the necessary tools as well as materials to start this project.

Moreover, those who have little knowledge or familiarity with the use of wet saw can quickly do the work. The wet saw mainly improves your working speed as well as efficiency.

Is the tutorial helpful? Do let us know in the comment section. If you have any queries related to how to cut marble, then do enlighten them in the comment section. We’ll be happy to assist you.